Home » Solar Turbine » Florida » Highland Park

Peak sun hours is one of the most important criteria to examine when considering installing a solar power system. Peak sun hours are different than total sunlight hours in a day because the strength of the radiation of the sun varies throughout the day. For example, during sunrise and sunset the solar insolation from the sun is less powerful than at noon. For a moment of sunshine to be considered a peak sun hour the intensity needs to be at least 1 kilowatt per square meter. This means that a square meter of your solar panel should be receiving 1 kilowatt of energy from the sun. This number is used because it is an amount of light that allows a solar panel to produce output efficiently and not under perform due to lack of sunlight power.

If you open the newspaper in the morning or watch the weather channel on the news you can get an accurate prediction of sunrise and sunset each day for Highland Park. However, still knowing that the latitude of Highland Park is 27.9 can be a helpful number for your solar panel setup and planning. The closer your latitude is to zero the closer you are to the equator. At the equator you find the most consistent total sunlight hours throughout any given day of the year. As your latitude increases you can see larger discrepancies of daily sunlight hours during the year. For example, having very long summer days and very short and dark winter days

The sun moves through the sky during the day, and changes positions in the sky throughout the year as the seasons change. A fixed solar panel remains fixed in position during this movement. So, although it is effective in capturing sunlight, a 1-axis or 2-axis panel can be more efficient. A 1-axis panel tracks the sun's movement throughout the day from sunrise to sunset. In addition to that, the 2-axis panel also accounts for the movement throughout the year.

There are more variables than latitude that can change average peak sun hours. Weather patterns and geography will influence solar insolation that reaches your system. Thick grey storm clouds for example will block out a lot of the sun to the point where there may be no peak sun hours in the middle of the day when the sun is usually very powerful. Trees and mountains can deflect the sunlight, so be sure your solar panel is selectively placed.

We can use previous years of data to estimate the amount of peak sun hours in Highland Park. A fixed tilt mount for example will receive 5.3 average hours per day. For more efficiency for your system in Highland Park you could use a 1-axis tracking mount and increase your daily peak sun average to 6.7 hours, or even further with a 2-axis panel to get an average of 6.9 hours.