Home » Solar Turbine » Kansas » Ulysses

Peak sun hours are a vital measurement to understand when considering the installation of solar panels. Peak sun hours are not the same as total sunlight hours because not every hour of sunlight during the day has enough strength and solar insolation to qualify as a peak sun hour. The rule of thumb is that a peak sun hour is when the intensity of the sun that is hitting your solar panel is providing at least 1,000 watts per square meter. This is an arbitrary number, but it is a number where most solar panels will be producing an efficient output and not underperforming due to sunshine that is not strong enough or direct enough.

The latitude at the equator of the earth is zero degrees. This is where sunlight strikes the earth most directly. Due to the earth's curved shape, sunlight hits at a various angles depending on location. As latitude increases, the further you are located from the equator and more variance you see in sunlight hours. The latitude of Ulysses is 37.6.

You will notice that the average peak sun hours for Ulysses change based on the type of panel being used. The reason for this is quite simple. A fixed panel does exactly what it sounds like, remains fixed in one position at all times. A 1-axis and 2-axis panels have axis that allow them to rotate. The 1-axis rotates with the sun's daily east to west movement while a 2-axis also adjusts for seasonal changes.

The sun is a great ball of gas that rises and sets every day that the earth rotates while in orbit around the sun. Barring any major disasters this is a very predictable occurance every day. Latitude helps predict this even more, narrowing it down to the minute for sunrise and sunset. But some things aren’t as predictable that will greatly influence the efficiency of solar panels. Weather and cloud coverage for example can greatly diminish peak sun hours on any given day. Thick storm clouds will block a high percentage of the sun's rays, resulting in lower output of your solar panels. Weather needs to be factored into deciding when to use your system, or how much output one expects to get.

In Ulysses you can look at the average peak sun hours of a fixed solar panel mount, which will be 5.2 hours. This number iis an estimate based on data of previous years. With a tracking mount in Ulysses you could theoretically increase the amount of peak sun hours per with a 1-axis mount, and get 6.8 hours, or a 2-axis mount and potentially increase your average to 7 hours.