Home » Solar Turbine » Iowa » California Junction

The average peak sun hours of California Junction is a crucial measurable component needed to efficiently implement a solar power system in a home or business. Put simply, peak sun hours are the hours of sunlight a day that are strong enough to be efficiently absorbed by solar panels and eventually turned into usable electricity. Not every minute of sunlight during a day is strong enough to be useful to a solar power system. Think about just minutes after the sunrises, which officially counts towards total hours of sunlight, but is usually too weak to be counted in peak sun hours because the strength of the solar insolation is not strong enough near the horizon to be absorbed and turned into electricity at an efficient rate. Times during the day like this, where the sun is out but not strong enough, are not counted as peak sun hours. In other words, the amount of peak sun hours in a location will theoretically always be less than total sunlight hours for a given day.

If you’re using a fixed axis and fixed tilt solar panel, the ideal angle of the panel mount should be set at an angle equal to or close to the latitude of the location of the panel. Latitude is a valuable measurement to use when figuring how many daylight hours and the angle of the sun in the sky for your location. Since at locations with a higher latitude the sun will find itself at more variable angles in the sky throughout the year it is important to set the angle of the panel correctly and efficiently capture more peak sun hours. In the Northern Hemisphere the sun will be at lower angles in the Southern sky in the winter, and higher angles during the summer months, so the angle of the panel is crucial when trying to maximize output.

Since a fixed solar panel is set in one position it is ideal to place it at an angle that will expose the panel to the most sunlight throughout the year. This angle is generally the same angle of your latitude which is 41.6 for California Junction. You do not need to strategically place a 1-axis or 2-axis panel as much as you do a fixed panel. A 1-axis panel follows the movement of the sun during the day. Additionally, a 2-axis panel also adjusts for the suns various positions in the sky throughout the year.

Another reason to consider average peak sun hours is because weather can dramatically affect the day-to-day output of solar panels. It goes without saying that a dark stormy day will produce less output than a clear sunny day. Looking at a yearly average helps account for these daily variables.

Since we know the latitude of California Junction we can take the average amount of total sunlight hours and estimate that with a fixed solar panel there would be an average of 4.5 peak sun hours per day. 6.5 hours per day with a 1-axis tracking mount that tracks the sun from sunrise to sunset, and 7 hours with a 2-axis tracking mount that tracks the sun everywhere in the sky.