Home » Solar Turbine » Kentucky » Adolphus

Peak sun hours is one of the most important criteria to examine when considering installing a solar power system. Peak sun hours are different than total sunlight hours in a day because the strength of the radiation of the sun varies throughout the day. For example, during sunrise and sunset the solar insolation from the sun is less powerful than at noon. For a moment of sunshine to be considered a peak sun hour the intensity needs to be at least 1 kilowatt per square meter. This means that a square meter of your solar panel should be receiving 1 kilowatt of energy from the sun. This number is used because it is an amount of light that allows a solar panel to produce output efficiently and not under perform due to lack of sunlight power.

Knowing that the latitude of Adolphus is 36.7 can be helpful for understanding total sunlight hour variance. As you approach the equator latitude approaches zero. The closer the latitude is to zero, the more consistent the daily sunlight hours are throughout the year. Total sunlight hour consistency simply makes planning for your solar power needs easier, but it is certainly not a requirement.

Since a fixed solar panel is set in one position it is ideal to place it at an angle that will expose the panel to the most sunlight throughout the year. This angle is generally the same angle of your latitude which is 36.7 for Adolphus. You do not need to strategically place a 1-axis or 2-axis panel as much as you do a fixed panel. A 1-axis panel follows the movement of the sun during the day. Additionally, a 2-axis panel also adjusts for the suns various positions in the sky throughout the year.

The sun is a great ball of gas that rises and sets every day that the earth rotates while in orbit around the sun. Barring any major disasters this is a very predictable occurance every day. Latitude helps predict this even more, narrowing it down to the minute for sunrise and sunset. But some things aren’t as predictable that will greatly influence the efficiency of solar panels. Weather and cloud coverage for example can greatly diminish peak sun hours on any given day. Thick storm clouds will block a high percentage of the sun's rays, resulting in lower output of your solar panels. Weather needs to be factored into deciding when to use your system, or how much output one expects to get.

In Adolphus the average yearly peak sun hours for a fixed tilt non-tracking solar panel mount is 4.3. This is for a fixed panel mounted at an angle that is equal to the latitude of the location for the entire year. The amount of peak sun hours increases to 5.3 hours if you are using a 1-axis panel, and to 5.6 hours if you upgrade to a 2-axis solar panel.