Home » Solar Turbine » Minnesota » Beltrami

Peak sun hours is one of the most important criteria to examine when considering installing a solar power system. Peak sun hours are different than total sunlight hours in a day because the strength of the radiation of the sun varies throughout the day. For example, during sunrise and sunset the solar insolation from the sun is less powerful than at noon. For a moment of sunshine to be considered a peak sun hour the intensity needs to be at least 1 kilowatt per square meter. This means that a square meter of your solar panel should be receiving 1 kilowatt of energy from the sun. This number is used because it is an amount of light that allows a solar panel to produce output efficiently and not under perform due to lack of sunlight power.

The latitude at the equator of the earth is zero degrees. This is where sunlight strikes the earth most directly. Due to the earth's curved shape, sunlight hits at a various angles depending on location. As latitude increases, the further you are located from the equator and more variance you see in sunlight hours. The latitude of Beltrami is 47.5.

They type of solar panel you use has an affect on the average peak sunlight hours. Some panels allow for movement, so they can track the sun as it rises in the east and sets in the west, or as the seasons change and the sun's path changes. A fixed panel remains fixed and does not have the ability to rotate, whereas a 1-axis and 2-axis panel can adjust with the sun.

The sun is a great ball of gas that rises and sets every day that the earth rotates while in orbit around the sun. Barring any major disasters this is a very predictable occurance every day. Latitude helps predict this even more, narrowing it down to the minute for sunrise and sunset. But some things aren’t as predictable that will greatly influence the efficiency of solar panels. Weather and cloud coverage for example can greatly diminish peak sun hours on any given day. Thick storm clouds will block a high percentage of the sun's rays, resulting in lower output of your solar panels. Weather needs to be factored into deciding when to use your system, or how much output one expects to get.

By taking the latitude of Beltrami one can get a close estimate of the amount of average peak sun hours per day for the geographical area. It varies with technology and the type of solar panel mount you use, but for a fixed mount solar panel in Beltrami one can expect close to 4.2 average peak sun hours per day. With a 1-axis tracking mount you would get 5.6 hours per day, and 6.4 hours per day with a 2-axis tracking mount that tracks the sun everywhere in the sky.