Home » Solar Turbine » Minnesota » Elba

The amount of hours from sunrise to sunset is equal to the total sunlight hours in a 24 hour period. Similarly, peak sun hours are the amount of total sunlight hours in a 24 hour period that are strong enough to provide power from being captured by a solar panel. Not every hour of sunlight delivers the same amount of energy resources. The sunlight at sunrise does not provide as many resources as the amount of sunlight mid-day. Thus, looking at the average peak sunlight hours for Elba is valuable for calculating your solar needs.

Although you can easily predict sunrise and sunset hours each day to the minute, looking at latitude can help with your solar planning. The closer you get to the equator the closer your latitude gets to zero. Sunlight hours on the equator are consistent throughout the entire year. Places further from the equator can have large variance in daily sunlight. For example higher latitudes can have very long summer days with lots of sunlight and very dark winters. The latitude of Elba is 44.1.

Since a fixed solar panel is set in one position it is ideal to place it at an angle that will expose the panel to the most sunlight throughout the year. This angle is generally the same angle of your latitude which is 44.1 for Elba. You do not need to strategically place a 1-axis or 2-axis panel as much as you do a fixed panel. A 1-axis panel follows the movement of the sun during the day. Additionally, a 2-axis panel also adjusts for the suns various positions in the sky throughout the year.

Another reason to consider average peak sun hours is because weather can dramatically affect the day-to-day output of solar panels. It goes without saying that a dark stormy day will produce less output than a clear sunny day. Looking at a yearly average helps account for these daily variables.

For Elba the number of average daily peak sunlight hours for a fixed solar panel is 4.3 hours. If you are using a more efficient 1 or 2-axis panel then the number will increase to 5.4 hours for a 1-axis panel and 6 hours for a 2-axis panel.