Home » Solar Turbine » Montana » Miner

When trying to calculate your solar power needs there are a variety of factors to consider. Panel type and location, electricity needs, number of panels needed etc. One key to figuring out the math is factoring in the average peak sunlight hours in a day. Unlike total sunlight hours, peak sunlight hours are only when the sun is strong enough to power your solar panel. Using this number can help determine your needs to power your home or business in Miner, Montana.

Your latitude is an indicator of when the sunrises and sunsets and certain times of the year. If you live near the equator with a latitude of near zero, the sun will rise and set close to the same time all year resulting in consistent total sunlight hours per day. If you live near the poles, the time of sunrise and sunset will vary dramatically with each season, resulting in long days for part of the year and very short days at other times. So, locations closer to the equator will have more consistent amounts of peak sun hours throughout the year than locations closer to the poles.

The sun moves through the sky during the day, and changes positions in the sky throughout the year as the seasons change. A fixed solar panel remains fixed in position during this movement. So, although it is effective in capturing sunlight, a 1-axis or 2-axis panel can be more efficient. A 1-axis panel tracks the sun's movement throughout the day from sunrise to sunset. In addition to that, the 2-axis panel also accounts for the movement throughout the year.

Although weather predicting technology has greatly evolved over time, it is still a rather unpredictable factor that will affect the amount of peak sun hours your solar power system will receive. Cloudy days for example will usually have lower peak sun hours that a clear sunny day. And areas that usually have more average sunny days per year will probably have higher peak sun hours that areas that are often overcast or stormy.

We can use previous years of data to estimate the amount of peak sun hours in Miner. A fixed tilt mount for example will receive 4.9 average hours per day. For more efficiency for your system in Miner you could use a 1-axis tracking mount and increase your daily peak sun average to 6.1 hours, or even further with a 2-axis panel to get an average of 6.4 hours.