Port Jefferson Solar Power Information & Peak Sun Hours
Solar Green Energy Summary for Port Jefferson, New York
Lattitude: 40.9465
Sunlight
Fixed Tilt Sunlight Hours: 4.8 hours per day
1-Axis Tilt Sunlight Hours: 5.4 hours per day
2-Axis Tilt Sunlight Hours: 5.5 hours per day
If you put your solar powered math calculator in your backpack it will turn off from the lack of sunlight needed to power the device. As you slowly open your backpack and begin to let sunlight in, the calculator will eventually turn on when the amount of sunlight is enough to power the calculator. Similarly, peak sun hours refer to the hours of they day where the sunlight is strong enough to power a solar panel. This is different from total sunlight hours, which is simply the amount of hours in a day when there is any sunlight.
The latitude at the equator of the earth is zero degrees. This is where sunlight strikes the earth most directly. Due to the earth's curved shape, sunlight hits at a various angles depending on location. As latitude increases, the further you are located from the equator and more variance you see in sunlight hours. The latitude of Port Jefferson is 40.9.
They type of solar panel you use has an affect on the average peak sunlight hours. Some panels allow for movement, so they can track the sun as it rises in the east and sets in the west, or as the seasons change and the sun's path changes. A fixed panel remains fixed and does not have the ability to rotate, whereas a 1-axis and 2-axis panel can adjust with the sun.
Peak sun hours are greatly affected by weather patterns. Cloud coverage is a huge factor in peak sun hours per day because heavy cloud coverage will diminish the power of the solar insolation. You can use historical climate data to estimate average cloud and weather coverage, but it will obviously vary slightly from year to year.
For Port Jefferson the number of average daily peak sunlight hours for a fixed solar panel is 4.8 hours. If you are using a more efficient 1 or 2-axis panel then the number will increase to 5.4 hours for a 1-axis panel and 5.5 hours for a 2-axis panel.