Home » Solar Turbine » North Carolina » Northlakes

Peak sun hours are a vital measurement to understand when considering the installation of solar panels. Peak sun hours are not the same as total sunlight hours because not every hour of sunlight during the day has enough strength and solar insolation to qualify as a peak sun hour. The rule of thumb is that a peak sun hour is when the intensity of the sun that is hitting your solar panel is providing at least 1,000 watts per square meter. This is an arbitrary number, but it is a number where most solar panels will be producing an efficient output and not underperforming due to sunshine that is not strong enough or direct enough.

If you’re using a fixed axis and fixed tilt solar panel, the ideal angle of the panel mount should be set at an angle equal to or close to the latitude of the location of the panel. Latitude is a valuable measurement to use when figuring how many daylight hours and the angle of the sun in the sky for your location. Since at locations with a higher latitude the sun will find itself at more variable angles in the sky throughout the year it is important to set the angle of the panel correctly and efficiently capture more peak sun hours. In the Northern Hemisphere the sun will be at lower angles in the Southern sky in the winter, and higher angles during the summer months, so the angle of the panel is crucial when trying to maximize output.

You will notice that the average peak sun hours for Northlakes change based on the type of panel being used. The reason for this is quite simple. A fixed panel does exactly what it sounds like, remains fixed in one position at all times. A 1-axis and 2-axis panels have axis that allow them to rotate. The 1-axis rotates with the sun's daily east to west movement while a 2-axis also adjusts for seasonal changes.

The sunrise and sunset is very predictable every day, but things like cloud coverage and weather are less predictable and vary daily and annually. If a location that is usually very sunny experiences a huge increase in storms and cloud coverage in a given year than the average peak sun hours for that day or year will probably decrease. Tall objects such as trees and buildings can block out the sun during high solar insolation times, so be sure to strategically place your solar panels to get better efficiency.

Using the latitude of Northlakes along with historical data of sunlight and weather patterns we can estimate that a fixed mounted solar panel will receive an average of 5.1 hours per day in this area. That number can be increased with better technology including add a 1-axis or 2-axis tracking mount, which would increase the average peak sun hours per day to 6.2 hours and 6.4 hours, respectively.