Beallsville Solar Power Information & Peak Sun Hours
Solar Green Energy Summary for Beallsville, Pennsylvania
Lattitude: 40.0619
Sunlight
Fixed Tilt Sunlight Hours: 4.8 hours per day
1-Axis Tilt Sunlight Hours: 5 hours per day
2-Axis Tilt Sunlight Hours: 5.6 hours per day
The average peak sun hours of Beallsville is a crucial measurable component needed to efficiently implement a solar power system in a home or business. Put simply, peak sun hours are the hours of sunlight a day that are strong enough to be efficiently absorbed by solar panels and eventually turned into usable electricity. Not every minute of sunlight during a day is strong enough to be useful to a solar power system. Think about just minutes after the sunrises, which officially counts towards total hours of sunlight, but is usually too weak to be counted in peak sun hours because the strength of the solar insolation is not strong enough near the horizon to be absorbed and turned into electricity at an efficient rate. Times during the day like this, where the sun is out but not strong enough, are not counted as peak sun hours. In other words, the amount of peak sun hours in a location will theoretically always be less than total sunlight hours for a given day.
The latitude of the location is important for measuring peak sun hours. The latitude determines how much overall sunlight there will be in a day. With a given latitude, time and date, one can accurately determine when sunrise and sunset will occur. Areas with latitudes closer to the equator will have a more consistent range of solar insolation throughout the year. Whereas areas closer to the poles will have a greater variance during the summer and winter months due to their higher latitudes.
You will notice that the average peak sun hours for Beallsville change based on the type of panel being used. The reason for this is quite simple. A fixed panel does exactly what it sounds like, remains fixed in one position at all times. A 1-axis and 2-axis panels have axis that allow them to rotate. The 1-axis rotates with the sun's daily east to west movement while a 2-axis also adjusts for seasonal changes.
Climate in your geographical region is a major factor that will influence average peak sun hours per year. If you live in a region that does not have a lot of completely sunny days, then cloud coverage will greatly influence solar insolation on any given day. Mountains and trees may also contribute to lower solar insolation if they block the sun from your panels at any given point of the day.
The average daily peak sunlight hours in Beallsville, Pennsylvania is 4.8 hours. Use this number when trying to calculate your solar needs in Beallsville. As you can see above, if you were to use a 1-Axis or 2-Axis panel then the daily average would increase to 5 hour and 5.6 hours, respectively.