Franksville Solar Power Information & Peak Sun Hours
Solar Green Energy Summary for Franksville, Wisconsin
Lattitude: 42.76
Sunlight
Fixed Tilt Sunlight Hours: 4.7 hours per day
1-Axis Tilt Sunlight Hours: 5.1 hours per day
2-Axis Tilt Sunlight Hours: 5.9 hours per day
The average peak sun hours of Franksville is a crucial measurable component needed to efficiently implement a solar power system in a home or business. Put simply, peak sun hours are the hours of sunlight a day that are strong enough to be efficiently absorbed by solar panels and eventually turned into usable electricity. Not every minute of sunlight during a day is strong enough to be useful to a solar power system. Think about just minutes after the sunrises, which officially counts towards total hours of sunlight, but is usually too weak to be counted in peak sun hours because the strength of the solar insolation is not strong enough near the horizon to be absorbed and turned into electricity at an efficient rate. Times during the day like this, where the sun is out but not strong enough, are not counted as peak sun hours. In other words, the amount of peak sun hours in a location will theoretically always be less than total sunlight hours for a given day.
The equator has a latitude of zero while Franksville has a latitude of 42.8. Any city located on the equator will receive the most sunlight throughout the year because the sunlight arrives at a perpendicular 90 degree angle to the earth at the equator. The further you are from the equator the more your daily sunlight hours can vary.
Throughout the day the sun obviously moves throughout the Franksville sky. The suns position in the sky also changes throughout the year with the seasons. A fixed solar panel does not accommodate for these changes. However, a 1-axis panel rotates and follows the sun’s path during the day. A 2-axis panel both follows the sun’s daily path as well as the seasonal differences
Although weather predicting technology has greatly evolved over time, it is still a rather unpredictable factor that will affect the amount of peak sun hours your solar power system will receive. Cloudy days for example will usually have lower peak sun hours that a clear sunny day. And areas that usually have more average sunny days per year will probably have higher peak sun hours that areas that are often overcast or stormy.
We can use previous years of data to estimate the amount of peak sun hours in Franksville. A fixed tilt mount for example will receive 4.7 average hours per day. For more efficiency for your system in Franksville you could use a 1-axis tracking mount and increase your daily peak sun average to 5.1 hours, or even further with a 2-axis panel to get an average of 5.9 hours.