Home » Solar Turbine » Alabama » Repton

If you put your solar powered math calculator in your backpack it will turn off from the lack of sunlight needed to power the device. As you slowly open your backpack and begin to let sunlight in, the calculator will eventually turn on when the amount of sunlight is enough to power the calculator. Similarly, peak sun hours refer to the hours of they day where the sunlight is strong enough to power a solar panel. This is different from total sunlight hours, which is simply the amount of hours in a day when there is any sunlight.

Although you can easily predict sunrise and sunset hours each day to the minute, looking at latitude can help with your solar planning. The closer you get to the equator the closer your latitude gets to zero. Sunlight hours on the equator are consistent throughout the entire year. Places further from the equator can have large variance in daily sunlight. For example higher latitudes can have very long summer days with lots of sunlight and very dark winters. The latitude of Repton is 31.4.

A tracking mount will increase the average peak sun hours for a solar power system. Think about a panel that is tracking the sun in the sky vs a panel that is fixed and not moving: you will see a higher efficiency ratio of productions. A 1-axis mount will track the sun from East to West from sunrise to sunset and move on a single axis of rotation. A 2-axis mount will track the Sun from East to West the same as a 1-axis mount would, but it will also track the angle of the sun in the sky as it slowly varies season to season. A 2-axis mount is more necessary in high latitude regions where the angle of the sun in the sky changes dramatically between each equinox.

Peak sun hours are greatly affected by weather patterns. Cloud coverage is a huge factor in peak sun hours per day because heavy cloud coverage will diminish the power of the solar insolation. You can use historical climate data to estimate average cloud and weather coverage, but it will obviously vary slightly from year to year.

We can use previous years of data to estimate the amount of peak sun hours in Repton. A fixed tilt mount for example will receive 5 average hours per day. For more efficiency for your system in Repton you could use a 1-axis tracking mount and increase your daily peak sun average to 6.2 hours, or even further with a 2-axis panel to get an average of 6.3 hours.