Standing Rock Solar Power Information & Peak Sun Hours
Solar Green Energy Summary for Standing Rock, Alabama
Lattitude: 33.0863
Sunlight
Fixed Tilt Sunlight Hours: 5.1 hours per day
1-Axis Tilt Sunlight Hours: 6.3 hours per day
2-Axis Tilt Sunlight Hours: 6.4 hours per day
The amount of hours from sunrise to sunset is equal to the total sunlight hours in a 24 hour period. Similarly, peak sun hours are the amount of total sunlight hours in a 24 hour period that are strong enough to provide power from being captured by a solar panel. Not every hour of sunlight delivers the same amount of energy resources. The sunlight at sunrise does not provide as many resources as the amount of sunlight mid-day. Thus, looking at the average peak sunlight hours for Standing Rock is valuable for calculating your solar needs.
The equator has a latitude of zero while Standing Rock has a latitude of 33.1. Any city located on the equator will receive the most sunlight throughout the year because the sunlight arrives at a perpendicular 90 degree angle to the earth at the equator. The further you are from the equator the more your daily sunlight hours can vary.
Throughout the day the sun obviously moves throughout the Standing Rock sky. The suns position in the sky also changes throughout the year with the seasons. A fixed solar panel does not accommodate for these changes. However, a 1-axis panel rotates and follows the sun’s path during the day. A 2-axis panel both follows the sun’s daily path as well as the seasonal differences
Although weather predicting technology has greatly evolved over time, it is still a rather unpredictable factor that will affect the amount of peak sun hours your solar power system will receive. Cloudy days for example will usually have lower peak sun hours that a clear sunny day. And areas that usually have more average sunny days per year will probably have higher peak sun hours that areas that are often overcast or stormy.
For Standing Rock the number of average daily peak sunlight hours for a fixed solar panel is 5.1 hours. If you are using a more efficient 1 or 2-axis panel then the number will increase to 6.3 hours for a 1-axis panel and 6.4 hours for a 2-axis panel.