Home » Solar Turbine » Arizona » Jerome

The average peak sun hours of Jerome is a crucial measurable component needed to efficiently implement a solar power system in a home or business. Put simply, peak sun hours are the hours of sunlight a day that are strong enough to be efficiently absorbed by solar panels and eventually turned into usable electricity. Not every minute of sunlight during a day is strong enough to be useful to a solar power system. Think about just minutes after the sunrises, which officially counts towards total hours of sunlight, but is usually too weak to be counted in peak sun hours because the strength of the solar insolation is not strong enough near the horizon to be absorbed and turned into electricity at an efficient rate. Times during the day like this, where the sun is out but not strong enough, are not counted as peak sun hours. In other words, the amount of peak sun hours in a location will theoretically always be less than total sunlight hours for a given day.

The equator has a latitude of zero while Jerome has a latitude of 34.7. Any city located on the equator will receive the most sunlight throughout the year because the sunlight arrives at a perpendicular 90 degree angle to the earth at the equator. The further you are from the equator the more your daily sunlight hours can vary.

There are a few ways to increase average peak sun hours per year for your solar power system. One way is to use a tracking mount solar panel instead of a fixed tilt solar panel. A 1-axis mount will track the sun throughout the sky from sunrise to sunset, giving your panel a more efficient facing direction towards the sun throughout the day. A 2-axis solar panel will track the sun in the sky throughout the day, but also change and follow the angle of the sun in the sky throughout the year. Both of these axis system solar panels will produce higher average peak sun hours than a fixed solar panel.

Although weather predicting technology has greatly evolved over time, it is still a rather unpredictable factor that will affect the amount of peak sun hours your solar power system will receive. Cloudy days for example will usually have lower peak sun hours that a clear sunny day. And areas that usually have more average sunny days per year will probably have higher peak sun hours that areas that are often overcast or stormy.

In Jerome the average yearly peak sun hours for a fixed tilt non-tracking solar panel mount is 6.2. This is for a fixed panel mounted at an angle that is equal to the latitude of the location for the entire year. The amount of peak sun hours increases to 8.6 hours if you are using a 1-axis panel, and to 9.1 hours if you upgrade to a 2-axis solar panel.