Home » Solar Turbine » Arkansas » Jefferson

Peak sun hours is one of the most important criteria to examine when considering installing a solar power system. Peak sun hours are different than total sunlight hours in a day because the strength of the radiation of the sun varies throughout the day. For example, during sunrise and sunset the solar insolation from the sun is less powerful than at noon. For a moment of sunshine to be considered a peak sun hour the intensity needs to be at least 1 kilowatt per square meter. This means that a square meter of your solar panel should be receiving 1 kilowatt of energy from the sun. This number is used because it is an amount of light that allows a solar panel to produce output efficiently and not under perform due to lack of sunlight power.

Knowing the latitude of Jefferson will help estimate average peak sun hours for your area. The latitude is used to accurately estimate the time of sunrise and sunset, thus giving you the total hours of daylight each day. Once you know the total hours of daylight, you can estimate the amount of peak sun hours based on a number of variables such as weather, time of year, the angle of the solar panel.

You will notice the difference in peak sunlight hours depending on the panel type. The more flexibility the solar panel has the efficient it can be throughout the day and the year. A fixed solar panel remains in the same position at all times. A 1-axis panel follows the sun throughout the day as it moves through the sky and eventually sets. A 2-axis panel not only tracks the daily movement, but also adjusts based on the sun's changing position in the sky throughout the year as the seasons change.

There are more variables than latitude that can change average peak sun hours. Weather patterns and geography will influence solar insolation that reaches your system. Thick grey storm clouds for example will block out a lot of the sun to the point where there may be no peak sun hours in the middle of the day when the sun is usually very powerful. Trees and mountains can deflect the sunlight, so be sure your solar panel is selectively placed.

We can use previous years of data to estimate the amount of peak sun hours in Jefferson. A fixed tilt mount for example will receive 4.8 average hours per day. For more efficiency for your system in Jefferson you could use a 1-axis tracking mount and increase your daily peak sun average to 6.1 hours, or even further with a 2-axis panel to get an average of 6.9 hours.