Home » Solar Turbine » California » Brisbane

Peak sun hours is one of the most important criteria to examine when considering installing a solar power system. Peak sun hours are different than total sunlight hours in a day because the strength of the radiation of the sun varies throughout the day. For example, during sunrise and sunset the solar insolation from the sun is less powerful than at noon. For a moment of sunshine to be considered a peak sun hour the intensity needs to be at least 1 kilowatt per square meter. This means that a square meter of your solar panel should be receiving 1 kilowatt of energy from the sun. This number is used because it is an amount of light that allows a solar panel to produce output efficiently and not under perform due to lack of sunlight power.

Knowing that the latitude of Brisbane is 37.7 can be helpful for understanding total sunlight hour variance. As you approach the equator latitude approaches zero. The closer the latitude is to zero, the more consistent the daily sunlight hours are throughout the year. Total sunlight hour consistency simply makes planning for your solar power needs easier, but it is certainly not a requirement.

Depending on your output needs, to get more out of your solar panels you can either upgrade your technology, buy more panels, or buy different tracking type panels. A fixed solar panel remains fixed at one angle throughout the year. A 1-axis panel will produce more output because it follows the path of the sun from sunrise to sunset to maximize sun exposure. Even more productive is a 2-axis panel that not only follows the sun's path throughout the day, but also accounts for the more subtle sun changes throughout the year with the different seasons.

Climate in your geographical region is a major factor that will influence average peak sun hours per year. If you live in a region that does not have a lot of completely sunny days, then cloud coverage will greatly influence solar insolation on any given day. Mountains and trees may also contribute to lower solar insolation if they block the sun from your panels at any given point of the day.

By taking the latitude of Brisbane one can get a close estimate of the amount of average peak sun hours per day for the geographical area. It varies with technology and the type of solar panel mount you use, but for a fixed mount solar panel in Brisbane one can expect close to 5.3 average peak sun hours per day. With a 1-axis tracking mount you would get 7.1 hours per day, and 7.7 hours per day with a 2-axis tracking mount that tracks the sun everywhere in the sky.