Home » Solar Turbine » Kansas » Fanning

The average peak sun hours of Fanning is a crucial measurable component needed to efficiently implement a solar power system in a home or business. Put simply, peak sun hours are the hours of sunlight a day that are strong enough to be efficiently absorbed by solar panels and eventually turned into usable electricity. Not every minute of sunlight during a day is strong enough to be useful to a solar power system. Think about just minutes after the sunrises, which officially counts towards total hours of sunlight, but is usually too weak to be counted in peak sun hours because the strength of the solar insolation is not strong enough near the horizon to be absorbed and turned into electricity at an efficient rate. Times during the day like this, where the sun is out but not strong enough, are not counted as peak sun hours. In other words, the amount of peak sun hours in a location will theoretically always be less than total sunlight hours for a given day.

If you open the newspaper in the morning or watch the weather channel on the news you can get an accurate prediction of sunrise and sunset each day for Fanning. However, still knowing that the latitude of Fanning is 39.8 can be a helpful number for your solar panel setup and planning. The closer your latitude is to zero the closer you are to the equator. At the equator you find the most consistent total sunlight hours throughout any given day of the year. As your latitude increases you can see larger discrepancies of daily sunlight hours during the year. For example, having very long summer days and very short and dark winter days

You will notice that the average peak sun hours for Fanning change based on the type of panel being used. The reason for this is quite simple. A fixed panel does exactly what it sounds like, remains fixed in one position at all times. A 1-axis and 2-axis panels have axis that allow them to rotate. The 1-axis rotates with the sun's daily east to west movement while a 2-axis also adjusts for seasonal changes.

Although weather predicting technology has greatly evolved over time, it is still a rather unpredictable factor that will affect the amount of peak sun hours your solar power system will receive. Cloudy days for example will usually have lower peak sun hours that a clear sunny day. And areas that usually have more average sunny days per year will probably have higher peak sun hours that areas that are often overcast or stormy.

In Fanning the average yearly peak sun hours for a fixed tilt non-tracking solar panel mount is 5.1. This is for a fixed panel mounted at an angle that is equal to the latitude of the location for the entire year. The amount of peak sun hours increases to 6.6 hours if you are using a 1-axis panel, and to 7.6 hours if you upgrade to a 2-axis solar panel.