Home » Solar Turbine » Kansas » Talmage

If you put your solar powered math calculator in your backpack it will turn off from the lack of sunlight needed to power the device. As you slowly open your backpack and begin to let sunlight in, the calculator will eventually turn on when the amount of sunlight is enough to power the calculator. Similarly, peak sun hours refer to the hours of they day where the sunlight is strong enough to power a solar panel. This is different from total sunlight hours, which is simply the amount of hours in a day when there is any sunlight.

Sunlight hits the earth directly at the equator. This is why the equator has a latitude of zero degrees. The latitude of Talmage is 39.0. Knowing the latitude of Talmage can help you plan for your solar panel setup, as the larger the latitude the more variance you will see throughout the year for total daily sunlight hours.

The sun moves through the sky during the day, and changes positions in the sky throughout the year as the seasons change. A fixed solar panel remains fixed in position during this movement. So, although it is effective in capturing sunlight, a 1-axis or 2-axis panel can be more efficient. A 1-axis panel tracks the sun's movement throughout the day from sunrise to sunset. In addition to that, the 2-axis panel also accounts for the movement throughout the year.

The sunrise and sunset is very predictable every day, but things like cloud coverage and weather are less predictable and vary daily and annually. If a location that is usually very sunny experiences a huge increase in storms and cloud coverage in a given year than the average peak sun hours for that day or year will probably decrease. Tall objects such as trees and buildings can block out the sun during high solar insolation times, so be sure to strategically place your solar panels to get better efficiency.

For Talmage the number of average daily peak sunlight hours for a fixed solar panel is 4.9 hours. If you are using a more efficient 1 or 2-axis panel then the number will increase to 6.4 hours for a 1-axis panel and 6.6 hours for a 2-axis panel.