Home » Solar Turbine » Kansas » Waverly

Peak sun hours is one of the most important criteria to examine when considering installing a solar power system. Peak sun hours are different than total sunlight hours in a day because the strength of the radiation of the sun varies throughout the day. For example, during sunrise and sunset the solar insolation from the sun is less powerful than at noon. For a moment of sunshine to be considered a peak sun hour the intensity needs to be at least 1 kilowatt per square meter. This means that a square meter of your solar panel should be receiving 1 kilowatt of energy from the sun. This number is used because it is an amount of light that allows a solar panel to produce output efficiently and not under perform due to lack of sunlight power.

Sunlight hits the earth directly at the equator. This is why the equator has a latitude of zero degrees. The latitude of Waverly is 38.4. Knowing the latitude of Waverly can help you plan for your solar panel setup, as the larger the latitude the more variance you will see throughout the year for total daily sunlight hours.

Throughout the day the sun obviously moves throughout the Waverly sky. The suns position in the sky also changes throughout the year with the seasons. A fixed solar panel does not accommodate for these changes. However, a 1-axis panel rotates and follows the sun’s path during the day. A 2-axis panel both follows the sun’s daily path as well as the seasonal differences

Weather is one of the major culprits that will cause inconsistent total peak sun hours for any given day. The sunrise and sunset will always be predictable every day, but the weather is hard to predict and cloud coverage can greatly diminish the efficiency of a solar power system on any given day. On the bright side, a location that is known to have cloudy weather a majority of the year could have unexpectedly more sunny days, so it can go both ways.

We can use previous years of data to estimate the amount of peak sun hours in Waverly. A fixed tilt mount for example will receive 5.2 average hours per day. For more efficiency for your system in Waverly you could use a 1-axis tracking mount and increase your daily peak sun average to 7.3 hours, or even further with a 2-axis panel to get an average of 7.5 hours.