Home » Solar Turbine » Maryland » Lusby

The average peak sun hours of Lusby is a crucial measurable component needed to efficiently implement a solar power system in a home or business. Put simply, peak sun hours are the hours of sunlight a day that are strong enough to be efficiently absorbed by solar panels and eventually turned into usable electricity. Not every minute of sunlight during a day is strong enough to be useful to a solar power system. Think about just minutes after the sunrises, which officially counts towards total hours of sunlight, but is usually too weak to be counted in peak sun hours because the strength of the solar insolation is not strong enough near the horizon to be absorbed and turned into electricity at an efficient rate. Times during the day like this, where the sun is out but not strong enough, are not counted as peak sun hours. In other words, the amount of peak sun hours in a location will theoretically always be less than total sunlight hours for a given day.

Your latitude is an indicator of when the sunrises and sunsets and certain times of the year. If you live near the equator with a latitude of near zero, the sun will rise and set close to the same time all year resulting in consistent total sunlight hours per day. If you live near the poles, the time of sunrise and sunset will vary dramatically with each season, resulting in long days for part of the year and very short days at other times. So, locations closer to the equator will have more consistent amounts of peak sun hours throughout the year than locations closer to the poles.

There are a few ways to increase average peak sun hours per year for your solar power system. One way is to use a tracking mount solar panel instead of a fixed tilt solar panel. A 1-axis mount will track the sun throughout the sky from sunrise to sunset, giving your panel a more efficient facing direction towards the sun throughout the day. A 2-axis solar panel will track the sun in the sky throughout the day, but also change and follow the angle of the sun in the sky throughout the year. Both of these axis system solar panels will produce higher average peak sun hours than a fixed solar panel.

Another reason to consider average peak sun hours is because weather can dramatically affect the day-to-day output of solar panels. It goes without saying that a dark stormy day will produce less output than a clear sunny day. Looking at a yearly average helps account for these daily variables.

In Lusby the average yearly peak sun hours for a fixed tilt non-tracking solar panel mount is 4. This is for a fixed panel mounted at an angle that is equal to the latitude of the location for the entire year. The amount of peak sun hours increases to 5.4 hours if you are using a 1-axis panel, and to 6.3 hours if you upgrade to a 2-axis solar panel.