Home » Solar Turbine » Maryland » Mount Briar

The average peak sun hours of Mount Briar is a crucial measurable component needed to efficiently implement a solar power system in a home or business. Put simply, peak sun hours are the hours of sunlight a day that are strong enough to be efficiently absorbed by solar panels and eventually turned into usable electricity. Not every minute of sunlight during a day is strong enough to be useful to a solar power system. Think about just minutes after the sunrises, which officially counts towards total hours of sunlight, but is usually too weak to be counted in peak sun hours because the strength of the solar insolation is not strong enough near the horizon to be absorbed and turned into electricity at an efficient rate. Times during the day like this, where the sun is out but not strong enough, are not counted as peak sun hours. In other words, the amount of peak sun hours in a location will theoretically always be less than total sunlight hours for a given day.

Sunlight hits the earth directly at the equator. This is why the equator has a latitude of zero degrees. The latitude of Mount Briar is 39.4. Knowing the latitude of Mount Briar can help you plan for your solar panel setup, as the larger the latitude the more variance you will see throughout the year for total daily sunlight hours.

A tracking mount will increase the average peak sun hours for a solar power system. Think about a panel that is tracking the sun in the sky vs a panel that is fixed and not moving: you will see a higher efficiency ratio of productions. A 1-axis mount will track the sun from East to West from sunrise to sunset and move on a single axis of rotation. A 2-axis mount will track the Sun from East to West the same as a 1-axis mount would, but it will also track the angle of the sun in the sky as it slowly varies season to season. A 2-axis mount is more necessary in high latitude regions where the angle of the sun in the sky changes dramatically between each equinox.

Another reason to consider average peak sun hours is because weather can dramatically affect the day-to-day output of solar panels. It goes without saying that a dark stormy day will produce less output than a clear sunny day. Looking at a yearly average helps account for these daily variables.

In Mount Briar the average yearly peak sun hours for a fixed tilt non-tracking solar panel mount is 4.4. This is for a fixed panel mounted at an angle that is equal to the latitude of the location for the entire year. The amount of peak sun hours increases to 5.2 hours if you are using a 1-axis panel, and to 6.1 hours if you upgrade to a 2-axis solar panel.