Home » Solar Turbine » Michigan » Holton

Peak sun hours is one of the most important criteria to examine when considering installing a solar power system. Peak sun hours are different than total sunlight hours in a day because the strength of the radiation of the sun varies throughout the day. For example, during sunrise and sunset the solar insolation from the sun is less powerful than at noon. For a moment of sunshine to be considered a peak sun hour the intensity needs to be at least 1 kilowatt per square meter. This means that a square meter of your solar panel should be receiving 1 kilowatt of energy from the sun. This number is used because it is an amount of light that allows a solar panel to produce output efficiently and not under perform due to lack of sunlight power.

If you open the newspaper in the morning or watch the weather channel on the news you can get an accurate prediction of sunrise and sunset each day for Holton. However, still knowing that the latitude of Holton is 43.4 can be a helpful number for your solar panel setup and planning. The closer your latitude is to zero the closer you are to the equator. At the equator you find the most consistent total sunlight hours throughout any given day of the year. As your latitude increases you can see larger discrepancies of daily sunlight hours during the year. For example, having very long summer days and very short and dark winter days

Depending on your output needs, to get more out of your solar panels you can either upgrade your technology, buy more panels, or buy different tracking type panels. A fixed solar panel remains fixed at one angle throughout the year. A 1-axis panel will produce more output because it follows the path of the sun from sunrise to sunset to maximize sun exposure. Even more productive is a 2-axis panel that not only follows the sun's path throughout the day, but also accounts for the more subtle sun changes throughout the year with the different seasons.

Peak sun hours are greatly affected by weather patterns. Cloud coverage is a huge factor in peak sun hours per day because heavy cloud coverage will diminish the power of the solar insolation. You can use historical climate data to estimate average cloud and weather coverage, but it will obviously vary slightly from year to year.

In Holton you can look at the average peak sun hours of a fixed solar panel mount, which will be 4.9 hours. This number iis an estimate based on data of previous years. With a tracking mount in Holton you could theoretically increase the amount of peak sun hours per with a 1-axis mount, and get 5.2 hours, or a 2-axis mount and potentially increase your average to 5.6 hours.