Home » Solar Turbine » Minnesota » Scanlon

Peak sun hours is arguably the most important number to consider before installing your solar panels. Unlike total sun hours, peak sun hours are calculated by looking at the amount of sunlight hours in a 24 hour period that is strong enough to be absorb by a solar panel. One way to imagine peak sun hours is to think about a solar powered calculator you owned in school. If you covered the solar panel with your finger, or tried to use the calculator in the dark, the calculator would not work. As you slowly exposed the calculator to light the calculator would eventually turn on and be usable. The same is true with peak sun hours; these are the hours that your solar panels receive enough sunlight to work. Looking at the average peak sunlight hours of 4 per day can help you determine the amount of solar panels you need to install to power your home or business in Scanlon, Minnesota.

If you open the newspaper in the morning or watch the weather channel on the news you can get an accurate prediction of sunrise and sunset each day for Scanlon. However, still knowing that the latitude of Scanlon is 46.7 can be a helpful number for your solar panel setup and planning. The closer your latitude is to zero the closer you are to the equator. At the equator you find the most consistent total sunlight hours throughout any given day of the year. As your latitude increases you can see larger discrepancies of daily sunlight hours during the year. For example, having very long summer days and very short and dark winter days

Throughout the day the sun obviously moves throughout the Scanlon sky. The suns position in the sky also changes throughout the year with the seasons. A fixed solar panel does not accommodate for these changes. However, a 1-axis panel rotates and follows the sun’s path during the day. A 2-axis panel both follows the sun’s daily path as well as the seasonal differences

The sun is a great ball of gas that rises and sets every day that the earth rotates while in orbit around the sun. Barring any major disasters this is a very predictable occurance every day. Latitude helps predict this even more, narrowing it down to the minute for sunrise and sunset. But some things aren’t as predictable that will greatly influence the efficiency of solar panels. Weather and cloud coverage for example can greatly diminish peak sun hours on any given day. Thick storm clouds will block a high percentage of the sun's rays, resulting in lower output of your solar panels. Weather needs to be factored into deciding when to use your system, or how much output one expects to get.

We can use previous years of data to estimate the amount of peak sun hours in Scanlon. A fixed tilt mount for example will receive 4 average hours per day. For more efficiency for your system in Scanlon you could use a 1-axis tracking mount and increase your daily peak sun average to 5.5 hours, or even further with a 2-axis panel to get an average of 6.1 hours.