Marks Solar Power Information & Peak Sun Hours
Solar Green Energy Summary for Marks, Mississippi
Lattitude: 34.2535
Sunlight
Fixed Tilt Sunlight Hours: 4.5 hours per day
1-Axis Tilt Sunlight Hours: 6 hours per day
2-Axis Tilt Sunlight Hours: 7.1 hours per day
If you put your solar powered math calculator in your backpack it will turn off from the lack of sunlight needed to power the device. As you slowly open your backpack and begin to let sunlight in, the calculator will eventually turn on when the amount of sunlight is enough to power the calculator. Similarly, peak sun hours refer to the hours of they day where the sunlight is strong enough to power a solar panel. This is different from total sunlight hours, which is simply the amount of hours in a day when there is any sunlight.
Knowing that the latitude of Marks is 34.3 can be helpful for understanding total sunlight hour variance. As you approach the equator latitude approaches zero. The closer the latitude is to zero, the more consistent the daily sunlight hours are throughout the year. Total sunlight hour consistency simply makes planning for your solar power needs easier, but it is certainly not a requirement.
Throughout the day the sun obviously moves throughout the Marks sky. The suns position in the sky also changes throughout the year with the seasons. A fixed solar panel does not accommodate for these changes. However, a 1-axis panel rotates and follows the sun’s path during the day. A 2-axis panel both follows the sun’s daily path as well as the seasonal differences
Climate in your geographical region is a major factor that will influence average peak sun hours per year. If you live in a region that does not have a lot of completely sunny days, then cloud coverage will greatly influence solar insolation on any given day. Mountains and trees may also contribute to lower solar insolation if they block the sun from your panels at any given point of the day.
For Marks the number of average daily peak sunlight hours for a fixed solar panel is 4.5 hours. If you are using a more efficient 1 or 2-axis panel then the number will increase to 6 hours for a 1-axis panel and 7.1 hours for a 2-axis panel.