Home » Solar Turbine » Nebraska » Kenesaw

The amount of hours from sunrise to sunset is equal to the total sunlight hours in a 24 hour period. Similarly, peak sun hours are the amount of total sunlight hours in a 24 hour period that are strong enough to provide power from being captured by a solar panel. Not every hour of sunlight delivers the same amount of energy resources. The sunlight at sunrise does not provide as many resources as the amount of sunlight mid-day. Thus, looking at the average peak sunlight hours for Kenesaw is valuable for calculating your solar needs.

If you’re using a fixed axis and fixed tilt solar panel, the ideal angle of the panel mount should be set at an angle equal to or close to the latitude of the location of the panel. Latitude is a valuable measurement to use when figuring how many daylight hours and the angle of the sun in the sky for your location. Since at locations with a higher latitude the sun will find itself at more variable angles in the sky throughout the year it is important to set the angle of the panel correctly and efficiently capture more peak sun hours. In the Northern Hemisphere the sun will be at lower angles in the Southern sky in the winter, and higher angles during the summer months, so the angle of the panel is crucial when trying to maximize output.

A tracking mount will increase the average peak sun hours for a solar power system. Think about a panel that is tracking the sun in the sky vs a panel that is fixed and not moving: you will see a higher efficiency ratio of productions. A 1-axis mount will track the sun from East to West from sunrise to sunset and move on a single axis of rotation. A 2-axis mount will track the Sun from East to West the same as a 1-axis mount would, but it will also track the angle of the sun in the sky as it slowly varies season to season. A 2-axis mount is more necessary in high latitude regions where the angle of the sun in the sky changes dramatically between each equinox.

Although weather predicting technology has greatly evolved over time, it is still a rather unpredictable factor that will affect the amount of peak sun hours your solar power system will receive. Cloudy days for example will usually have lower peak sun hours that a clear sunny day. And areas that usually have more average sunny days per year will probably have higher peak sun hours that areas that are often overcast or stormy.

For Kenesaw the number of average daily peak sunlight hours for a fixed solar panel is 5 hours. If you are using a more efficient 1 or 2-axis panel then the number will increase to 6.3 hours for a 1-axis panel and 7.2 hours for a 2-axis panel.