Home » Solar Turbine » Nebraska » Sterling

Peak sun hours are a vital measurement to understand when considering the installation of solar panels. Peak sun hours are not the same as total sunlight hours because not every hour of sunlight during the day has enough strength and solar insolation to qualify as a peak sun hour. The rule of thumb is that a peak sun hour is when the intensity of the sun that is hitting your solar panel is providing at least 1,000 watts per square meter. This is an arbitrary number, but it is a number where most solar panels will be producing an efficient output and not underperforming due to sunshine that is not strong enough or direct enough.

If you’re using a fixed axis and fixed tilt solar panel, the ideal angle of the panel mount should be set at an angle equal to or close to the latitude of the location of the panel. Latitude is a valuable measurement to use when figuring how many daylight hours and the angle of the sun in the sky for your location. Since at locations with a higher latitude the sun will find itself at more variable angles in the sky throughout the year it is important to set the angle of the panel correctly and efficiently capture more peak sun hours. In the Northern Hemisphere the sun will be at lower angles in the Southern sky in the winter, and higher angles during the summer months, so the angle of the panel is crucial when trying to maximize output.

Depending on your output needs, to get more out of your solar panels you can either upgrade your technology, buy more panels, or buy different tracking type panels. A fixed solar panel remains fixed at one angle throughout the year. A 1-axis panel will produce more output because it follows the path of the sun from sunrise to sunset to maximize sun exposure. Even more productive is a 2-axis panel that not only follows the sun's path throughout the day, but also accounts for the more subtle sun changes throughout the year with the different seasons.

Although weather predicting technology has greatly evolved over time, it is still a rather unpredictable factor that will affect the amount of peak sun hours your solar power system will receive. Cloudy days for example will usually have lower peak sun hours that a clear sunny day. And areas that usually have more average sunny days per year will probably have higher peak sun hours that areas that are often overcast or stormy.

In Sterling you can look at the average peak sun hours of a fixed solar panel mount, which will be 5.2 hours. This number iis an estimate based on data of previous years. With a tracking mount in Sterling you could theoretically increase the amount of peak sun hours per with a 1-axis mount, and get 6 hours, or a 2-axis mount and potentially increase your average to 7.1 hours.