Home » Solar Turbine » North Carolina » Clemmons

Looking at the average peak sunlight hours in Clemmons is a valuable number for determining your solar power setup. Peak sunlight hours are only the hours a day in which the sunlight is strong enough for the solar panels to do their job. Not every hour of sunlight was created equal. For example, solar panels do not provide much use during early sunrise and sunset, and therefore you should not look at total hours of sunlight in a day, but instead focus on peak sunlight hours. Using this number will provide a much better estimate of your needs for setting up panels in Clemmons, North Carolina.

Sunlight hits the earth directly at the equator. This is why the equator has a latitude of zero degrees. The latitude of Clemmons is 36.0. Knowing the latitude of Clemmons can help you plan for your solar panel setup, as the larger the latitude the more variance you will see throughout the year for total daily sunlight hours.

The sun moves through the sky during the day, and changes positions in the sky throughout the year as the seasons change. A fixed solar panel remains fixed in position during this movement. So, although it is effective in capturing sunlight, a 1-axis or 2-axis panel can be more efficient. A 1-axis panel tracks the sun's movement throughout the day from sunrise to sunset. In addition to that, the 2-axis panel also accounts for the movement throughout the year.

Although weather predicting technology has greatly evolved over time, it is still a rather unpredictable factor that will affect the amount of peak sun hours your solar power system will receive. Cloudy days for example will usually have lower peak sun hours that a clear sunny day. And areas that usually have more average sunny days per year will probably have higher peak sun hours that areas that are often overcast or stormy.

For Clemmons the number of average daily peak sunlight hours for a fixed solar panel is 5 hours. If you are using a more efficient 1 or 2-axis panel then the number will increase to 6.4 hours for a 1-axis panel and 6.5 hours for a 2-axis panel.