Home » Solar Turbine » North Carolina » Sylva

Peak sun hours is one of the most important criteria to examine when considering installing a solar power system. Peak sun hours are different than total sunlight hours in a day because the strength of the radiation of the sun varies throughout the day. For example, during sunrise and sunset the solar insolation from the sun is less powerful than at noon. For a moment of sunshine to be considered a peak sun hour the intensity needs to be at least 1 kilowatt per square meter. This means that a square meter of your solar panel should be receiving 1 kilowatt of energy from the sun. This number is used because it is an amount of light that allows a solar panel to produce output efficiently and not under perform due to lack of sunlight power.

If you open the newspaper in the morning or watch the weather channel on the news you can get an accurate prediction of sunrise and sunset each day for Sylva. However, still knowing that the latitude of Sylva is 35.4 can be a helpful number for your solar panel setup and planning. The closer your latitude is to zero the closer you are to the equator. At the equator you find the most consistent total sunlight hours throughout any given day of the year. As your latitude increases you can see larger discrepancies of daily sunlight hours during the year. For example, having very long summer days and very short and dark winter days

Since a fixed solar panel is set in one position it is ideal to place it at an angle that will expose the panel to the most sunlight throughout the year. This angle is generally the same angle of your latitude which is 35.4 for Sylva. You do not need to strategically place a 1-axis or 2-axis panel as much as you do a fixed panel. A 1-axis panel follows the movement of the sun during the day. Additionally, a 2-axis panel also adjusts for the suns various positions in the sky throughout the year.

Peak sun hours are greatly affected by weather patterns. Cloud coverage is a huge factor in peak sun hours per day because heavy cloud coverage will diminish the power of the solar insolation. You can use historical climate data to estimate average cloud and weather coverage, but it will obviously vary slightly from year to year.

We can use previous years of data to estimate the amount of peak sun hours in Sylva. A fixed tilt mount for example will receive 4.9 average hours per day. For more efficiency for your system in Sylva you could use a 1-axis tracking mount and increase your daily peak sun average to 6 hours, or even further with a 2-axis panel to get an average of 6.3 hours.