Home » Solar Turbine » Ohio » Newtonsville

If you put your solar powered math calculator in your backpack it will turn off from the lack of sunlight needed to power the device. As you slowly open your backpack and begin to let sunlight in, the calculator will eventually turn on when the amount of sunlight is enough to power the calculator. Similarly, peak sun hours refer to the hours of they day where the sunlight is strong enough to power a solar panel. This is different from total sunlight hours, which is simply the amount of hours in a day when there is any sunlight.

If you’re using a fixed axis and fixed tilt solar panel, the ideal angle of the panel mount should be set at an angle equal to or close to the latitude of the location of the panel. Latitude is a valuable measurement to use when figuring how many daylight hours and the angle of the sun in the sky for your location. Since at locations with a higher latitude the sun will find itself at more variable angles in the sky throughout the year it is important to set the angle of the panel correctly and efficiently capture more peak sun hours. In the Northern Hemisphere the sun will be at lower angles in the Southern sky in the winter, and higher angles during the summer months, so the angle of the panel is crucial when trying to maximize output.

A tracking mount will increase the average peak sun hours for a solar power system. Think about a panel that is tracking the sun in the sky vs a panel that is fixed and not moving: you will see a higher efficiency ratio of productions. A 1-axis mount will track the sun from East to West from sunrise to sunset and move on a single axis of rotation. A 2-axis mount will track the Sun from East to West the same as a 1-axis mount would, but it will also track the angle of the sun in the sky as it slowly varies season to season. A 2-axis mount is more necessary in high latitude regions where the angle of the sun in the sky changes dramatically between each equinox.

Peak sun hours are greatly affected by weather patterns. Cloud coverage is a huge factor in peak sun hours per day because heavy cloud coverage will diminish the power of the solar insolation. You can use historical climate data to estimate average cloud and weather coverage, but it will obviously vary slightly from year to year.

Using the latitude of Newtonsville along with historical data of sunlight and weather patterns we can estimate that a fixed mounted solar panel will receive an average of 4.3 hours per day in this area. That number can be increased with better technology including add a 1-axis or 2-axis tracking mount, which would increase the average peak sun hours per day to 5.5 hours and 5.6 hours, respectively.