Home » Solar Turbine » Ohio » Sarahsville

Peak sun hours are a vital measurement to understand when considering the installation of solar panels. Peak sun hours are not the same as total sunlight hours because not every hour of sunlight during the day has enough strength and solar insolation to qualify as a peak sun hour. The rule of thumb is that a peak sun hour is when the intensity of the sun that is hitting your solar panel is providing at least 1,000 watts per square meter. This is an arbitrary number, but it is a number where most solar panels will be producing an efficient output and not underperforming due to sunshine that is not strong enough or direct enough.

If you’re using a fixed axis and fixed tilt solar panel, the ideal angle of the panel mount should be set at an angle equal to or close to the latitude of the location of the panel. Latitude is a valuable measurement to use when figuring how many daylight hours and the angle of the sun in the sky for your location. Since at locations with a higher latitude the sun will find itself at more variable angles in the sky throughout the year it is important to set the angle of the panel correctly and efficiently capture more peak sun hours. In the Northern Hemisphere the sun will be at lower angles in the Southern sky in the winter, and higher angles during the summer months, so the angle of the panel is crucial when trying to maximize output.

Throughout the day the sun obviously moves throughout the Sarahsville sky. The suns position in the sky also changes throughout the year with the seasons. A fixed solar panel does not accommodate for these changes. However, a 1-axis panel rotates and follows the sun’s path during the day. A 2-axis panel both follows the sun’s daily path as well as the seasonal differences

There are more variables than latitude that can change average peak sun hours. Weather patterns and geography will influence solar insolation that reaches your system. Thick grey storm clouds for example will block out a lot of the sun to the point where there may be no peak sun hours in the middle of the day when the sun is usually very powerful. Trees and mountains can deflect the sunlight, so be sure your solar panel is selectively placed.

For a fixed mounted solar panel in Sarahsville, meaning that the solar panel will not track the sun in the sky, once can expect about 4 average peak sun hours per day. A 1-axis mount would increase this number to 5.2 hours per day because the panel would be facing the sun throughout the day. A 2-axis system that tracks the sun in the sky every day of the year would get approximately 5.5 hours per day in Sarahsville.