Home » Solar Turbine » Oregon » Chemult

The average peak sun hours of Chemult is a crucial measurable component needed to efficiently implement a solar power system in a home or business. Put simply, peak sun hours are the hours of sunlight a day that are strong enough to be efficiently absorbed by solar panels and eventually turned into usable electricity. Not every minute of sunlight during a day is strong enough to be useful to a solar power system. Think about just minutes after the sunrises, which officially counts towards total hours of sunlight, but is usually too weak to be counted in peak sun hours because the strength of the solar insolation is not strong enough near the horizon to be absorbed and turned into electricity at an efficient rate. Times during the day like this, where the sun is out but not strong enough, are not counted as peak sun hours. In other words, the amount of peak sun hours in a location will theoretically always be less than total sunlight hours for a given day.

If you’re using a fixed axis and fixed tilt solar panel, the ideal angle of the panel mount should be set at an angle equal to or close to the latitude of the location of the panel. Latitude is a valuable measurement to use when figuring how many daylight hours and the angle of the sun in the sky for your location. Since at locations with a higher latitude the sun will find itself at more variable angles in the sky throughout the year it is important to set the angle of the panel correctly and efficiently capture more peak sun hours. In the Northern Hemisphere the sun will be at lower angles in the Southern sky in the winter, and higher angles during the summer months, so the angle of the panel is crucial when trying to maximize output.

Throughout the day the sun obviously moves throughout the Chemult sky. The suns position in the sky also changes throughout the year with the seasons. A fixed solar panel does not accommodate for these changes. However, a 1-axis panel rotates and follows the sun’s path during the day. A 2-axis panel both follows the sun’s daily path as well as the seasonal differences

There are more variables than latitude that can change average peak sun hours. Weather patterns and geography will influence solar insolation that reaches your system. Thick grey storm clouds for example will block out a lot of the sun to the point where there may be no peak sun hours in the middle of the day when the sun is usually very powerful. Trees and mountains can deflect the sunlight, so be sure your solar panel is selectively placed.

We can use previous years of data to estimate the amount of peak sun hours in Chemult. A fixed tilt mount for example will receive 5.4 average hours per day. For more efficiency for your system in Chemult you could use a 1-axis tracking mount and increase your daily peak sun average to 6 hours, or even further with a 2-axis panel to get an average of 6.7 hours.