Home » Solar Turbine » Oregon » Hines

Peak sun hours are a vital measurement to understand when considering the installation of solar panels. Peak sun hours are not the same as total sunlight hours because not every hour of sunlight during the day has enough strength and solar insolation to qualify as a peak sun hour. The rule of thumb is that a peak sun hour is when the intensity of the sun that is hitting your solar panel is providing at least 1,000 watts per square meter. This is an arbitrary number, but it is a number where most solar panels will be producing an efficient output and not underperforming due to sunshine that is not strong enough or direct enough.

Sunlight hits the earth directly at the equator. This is why the equator has a latitude of zero degrees. The latitude of Hines is 43.6. Knowing the latitude of Hines can help you plan for your solar panel setup, as the larger the latitude the more variance you will see throughout the year for total daily sunlight hours.

A tracking mount will increase the average peak sun hours for a solar power system. Think about a panel that is tracking the sun in the sky vs a panel that is fixed and not moving: you will see a higher efficiency ratio of productions. A 1-axis mount will track the sun from East to West from sunrise to sunset and move on a single axis of rotation. A 2-axis mount will track the Sun from East to West the same as a 1-axis mount would, but it will also track the angle of the sun in the sky as it slowly varies season to season. A 2-axis mount is more necessary in high latitude regions where the angle of the sun in the sky changes dramatically between each equinox.

There are more variables than latitude that can change average peak sun hours. Weather patterns and geography will influence solar insolation that reaches your system. Thick grey storm clouds for example will block out a lot of the sun to the point where there may be no peak sun hours in the middle of the day when the sun is usually very powerful. Trees and mountains can deflect the sunlight, so be sure your solar panel is selectively placed.

We can use previous years of data to estimate the amount of peak sun hours in Hines. A fixed tilt mount for example will receive 4.5 average hours per day. For more efficiency for your system in Hines you could use a 1-axis tracking mount and increase your daily peak sun average to 6.4 hours, or even further with a 2-axis panel to get an average of 7.5 hours.