Home » Solar Turbine » Pennsylvania » Wyalusing

The average peak sun hours of Wyalusing is a crucial measurable component needed to efficiently implement a solar power system in a home or business. Put simply, peak sun hours are the hours of sunlight a day that are strong enough to be efficiently absorbed by solar panels and eventually turned into usable electricity. Not every minute of sunlight during a day is strong enough to be useful to a solar power system. Think about just minutes after the sunrises, which officially counts towards total hours of sunlight, but is usually too weak to be counted in peak sun hours because the strength of the solar insolation is not strong enough near the horizon to be absorbed and turned into electricity at an efficient rate. Times during the day like this, where the sun is out but not strong enough, are not counted as peak sun hours. In other words, the amount of peak sun hours in a location will theoretically always be less than total sunlight hours for a given day.

The latitude of the location is important for measuring peak sun hours. The latitude determines how much overall sunlight there will be in a day. With a given latitude, time and date, one can accurately determine when sunrise and sunset will occur. Areas with latitudes closer to the equator will have a more consistent range of solar insolation throughout the year. Whereas areas closer to the poles will have a greater variance during the summer and winter months due to their higher latitudes.

You will notice that the average peak sun hours for Wyalusing change based on the type of panel being used. The reason for this is quite simple. A fixed panel does exactly what it sounds like, remains fixed in one position at all times. A 1-axis and 2-axis panels have axis that allow them to rotate. The 1-axis rotates with the sun's daily east to west movement while a 2-axis also adjusts for seasonal changes.

Peak sun hours are greatly affected by weather patterns. Cloud coverage is a huge factor in peak sun hours per day because heavy cloud coverage will diminish the power of the solar insolation. You can use historical climate data to estimate average cloud and weather coverage, but it will obviously vary slightly from year to year.

In Wyalusing the average yearly peak sun hours for a fixed tilt non-tracking solar panel mount is 4.9. This is for a fixed panel mounted at an angle that is equal to the latitude of the location for the entire year. The amount of peak sun hours increases to 5.4 hours if you are using a 1-axis panel, and to 5.5 hours if you upgrade to a 2-axis solar panel.