Home » Solar Turbine » Texas » Bronson

When trying to calculate your solar power needs there are a variety of factors to consider. Panel type and location, electricity needs, number of panels needed etc. One key to figuring out the math is factoring in the average peak sunlight hours in a day. Unlike total sunlight hours, peak sunlight hours are only when the sun is strong enough to power your solar panel. Using this number can help determine your needs to power your home or business in Bronson, Texas.

If you’re using a fixed axis and fixed tilt solar panel, the ideal angle of the panel mount should be set at an angle equal to or close to the latitude of the location of the panel. Latitude is a valuable measurement to use when figuring how many daylight hours and the angle of the sun in the sky for your location. Since at locations with a higher latitude the sun will find itself at more variable angles in the sky throughout the year it is important to set the angle of the panel correctly and efficiently capture more peak sun hours. In the Northern Hemisphere the sun will be at lower angles in the Southern sky in the winter, and higher angles during the summer months, so the angle of the panel is crucial when trying to maximize output.

Throughout the day the sun obviously moves throughout the Bronson sky. The suns position in the sky also changes throughout the year with the seasons. A fixed solar panel does not accommodate for these changes. However, a 1-axis panel rotates and follows the sun’s path during the day. A 2-axis panel both follows the sun’s daily path as well as the seasonal differences

The sunrise and sunset is very predictable every day, but things like cloud coverage and weather are less predictable and vary daily and annually. If a location that is usually very sunny experiences a huge increase in storms and cloud coverage in a given year than the average peak sun hours for that day or year will probably decrease. Tall objects such as trees and buildings can block out the sun during high solar insolation times, so be sure to strategically place your solar panels to get better efficiency.

In Bronson you can look at the average peak sun hours of a fixed solar panel mount, which will be 5.7 hours. This number iis an estimate based on data of previous years. With a tracking mount in Bronson you could theoretically increase the amount of peak sun hours per with a 1-axis mount, and get 7.4 hours, or a 2-axis mount and potentially increase your average to 8.2 hours.