Home » Solar Turbine » Texas » Cone

The average peak sun hours of Cone is a crucial measurable component needed to efficiently implement a solar power system in a home or business. Put simply, peak sun hours are the hours of sunlight a day that are strong enough to be efficiently absorbed by solar panels and eventually turned into usable electricity. Not every minute of sunlight during a day is strong enough to be useful to a solar power system. Think about just minutes after the sunrises, which officially counts towards total hours of sunlight, but is usually too weak to be counted in peak sun hours because the strength of the solar insolation is not strong enough near the horizon to be absorbed and turned into electricity at an efficient rate. Times during the day like this, where the sun is out but not strong enough, are not counted as peak sun hours. In other words, the amount of peak sun hours in a location will theoretically always be less than total sunlight hours for a given day.

Knowing the latitude of Cone will help estimate average peak sun hours for your area. The latitude is used to accurately estimate the time of sunrise and sunset, thus giving you the total hours of daylight each day. Once you know the total hours of daylight, you can estimate the amount of peak sun hours based on a number of variables such as weather, time of year, the angle of the solar panel.

You will notice that the average peak sun hours for Cone change based on the type of panel being used. The reason for this is quite simple. A fixed panel does exactly what it sounds like, remains fixed in one position at all times. A 1-axis and 2-axis panels have axis that allow them to rotate. The 1-axis rotates with the sun's daily east to west movement while a 2-axis also adjusts for seasonal changes.

Climate in your geographical region is a major factor that will influence average peak sun hours per year. If you live in a region that does not have a lot of completely sunny days, then cloud coverage will greatly influence solar insolation on any given day. Mountains and trees may also contribute to lower solar insolation if they block the sun from your panels at any given point of the day.

We can take the latitude of Cone and use that number to know the amount of total sunlight hours in the region from sunlight to sunset and estimate that with a fixed solar panel, Cone will receive 5.4 average peak sun hours per day. This number can be increased to 7.3 hours by using a 1-axis tracking mount, or 7.5 hours from a 2-axis tracking mount.