Home » Solar Turbine » Texas » D’Hanis

Peak sun hours is one of the most important criteria to examine when considering installing a solar power system. Peak sun hours are different than total sunlight hours in a day because the strength of the radiation of the sun varies throughout the day. For example, during sunrise and sunset the solar insolation from the sun is less powerful than at noon. For a moment of sunshine to be considered a peak sun hour the intensity needs to be at least 1 kilowatt per square meter. This means that a square meter of your solar panel should be receiving 1 kilowatt of energy from the sun. This number is used because it is an amount of light that allows a solar panel to produce output efficiently and not under perform due to lack of sunlight power.

Although you can easily predict sunrise and sunset hours each day to the minute, looking at latitude can help with your solar planning. The closer you get to the equator the closer your latitude gets to zero. Sunlight hours on the equator are consistent throughout the entire year. Places further from the equator can have large variance in daily sunlight. For example higher latitudes can have very long summer days with lots of sunlight and very dark winters. The latitude of D’Hanis is 29.3.

A tracking mount will increase the average peak sun hours for a solar power system. Think about a panel that is tracking the sun in the sky vs a panel that is fixed and not moving: you will see a higher efficiency ratio of productions. A 1-axis mount will track the sun from East to West from sunrise to sunset and move on a single axis of rotation. A 2-axis mount will track the Sun from East to West the same as a 1-axis mount would, but it will also track the angle of the sun in the sky as it slowly varies season to season. A 2-axis mount is more necessary in high latitude regions where the angle of the sun in the sky changes dramatically between each equinox.

Another reason to consider average peak sun hours is because weather can dramatically affect the day-to-day output of solar panels. It goes without saying that a dark stormy day will produce less output than a clear sunny day. Looking at a yearly average helps account for these daily variables.

In D’Hanis the average yearly peak sun hours for a fixed tilt non-tracking solar panel mount is 4.4. This is for a fixed panel mounted at an angle that is equal to the latitude of the location for the entire year. The amount of peak sun hours increases to 7 hours if you are using a 1-axis panel, and to 7.6 hours if you upgrade to a 2-axis solar panel.