Home » Solar Turbine » Utah » Ferron

The average peak sun hours of Ferron is a crucial measurable component needed to efficiently implement a solar power system in a home or business. Put simply, peak sun hours are the hours of sunlight a day that are strong enough to be efficiently absorbed by solar panels and eventually turned into usable electricity. Not every minute of sunlight during a day is strong enough to be useful to a solar power system. Think about just minutes after the sunrises, which officially counts towards total hours of sunlight, but is usually too weak to be counted in peak sun hours because the strength of the solar insolation is not strong enough near the horizon to be absorbed and turned into electricity at an efficient rate. Times during the day like this, where the sun is out but not strong enough, are not counted as peak sun hours. In other words, the amount of peak sun hours in a location will theoretically always be less than total sunlight hours for a given day.

The latitude at the equator of the earth is zero degrees. This is where sunlight strikes the earth most directly. Due to the earth's curved shape, sunlight hits at a various angles depending on location. As latitude increases, the further you are located from the equator and more variance you see in sunlight hours. The latitude of Ferron is 39.1.

Since a fixed solar panel is set in one position it is ideal to place it at an angle that will expose the panel to the most sunlight throughout the year. This angle is generally the same angle of your latitude which is 39.1 for Ferron. You do not need to strategically place a 1-axis or 2-axis panel as much as you do a fixed panel. A 1-axis panel follows the movement of the sun during the day. Additionally, a 2-axis panel also adjusts for the suns various positions in the sky throughout the year.

There are more variables than latitude that can change average peak sun hours. Weather patterns and geography will influence solar insolation that reaches your system. Thick grey storm clouds for example will block out a lot of the sun to the point where there may be no peak sun hours in the middle of the day when the sun is usually very powerful. Trees and mountains can deflect the sunlight, so be sure your solar panel is selectively placed.

The average daily peak sunlight hours in Ferron, Utah is 5.5 hours. Use this number when trying to calculate your solar needs in Ferron. As you can see above, if you were to use a 1-Axis or 2-Axis panel then the daily average would increase to 7.8 hour and 8.3 hours, respectively.