Home » Solar Turbine » Utah » Pleasant View

Peak sun hours is one of the most important criteria to examine when considering installing a solar power system. Peak sun hours are different than total sunlight hours in a day because the strength of the radiation of the sun varies throughout the day. For example, during sunrise and sunset the solar insolation from the sun is less powerful than at noon. For a moment of sunshine to be considered a peak sun hour the intensity needs to be at least 1 kilowatt per square meter. This means that a square meter of your solar panel should be receiving 1 kilowatt of energy from the sun. This number is used because it is an amount of light that allows a solar panel to produce output efficiently and not under perform due to lack of sunlight power.

Knowing that the latitude of Pleasant View is 41.3 can be helpful for understanding total sunlight hour variance. As you approach the equator latitude approaches zero. The closer the latitude is to zero, the more consistent the daily sunlight hours are throughout the year. Total sunlight hour consistency simply makes planning for your solar power needs easier, but it is certainly not a requirement.

A tracking mount will increase the average peak sun hours for a solar power system. Think about a panel that is tracking the sun in the sky vs a panel that is fixed and not moving: you will see a higher efficiency ratio of productions. A 1-axis mount will track the sun from East to West from sunrise to sunset and move on a single axis of rotation. A 2-axis mount will track the Sun from East to West the same as a 1-axis mount would, but it will also track the angle of the sun in the sky as it slowly varies season to season. A 2-axis mount is more necessary in high latitude regions where the angle of the sun in the sky changes dramatically between each equinox.

Climate in your geographical region is a major factor that will influence average peak sun hours per year. If you live in a region that does not have a lot of completely sunny days, then cloud coverage will greatly influence solar insolation on any given day. Mountains and trees may also contribute to lower solar insolation if they block the sun from your panels at any given point of the day.

We can use previous years of data to estimate the amount of peak sun hours in Pleasant View. A fixed tilt mount for example will receive 6.9 average hours per day. For more efficiency for your system in Pleasant View you could use a 1-axis tracking mount and increase your daily peak sun average to 7.4 hours, or even further with a 2-axis panel to get an average of 8.2 hours.