Louisa Solar Power Information & Peak Sun Hours
Solar Green Energy Summary for Louisa, Virginia
Lattitude: 38.0212
Sunlight
Fixed Tilt Sunlight Hours: 4.5 hours per day
1-Axis Tilt Sunlight Hours: 5.8 hours per day
2-Axis Tilt Sunlight Hours: 6.9 hours per day
If you put your solar powered math calculator in your backpack it will turn off from the lack of sunlight needed to power the device. As you slowly open your backpack and begin to let sunlight in, the calculator will eventually turn on when the amount of sunlight is enough to power the calculator. Similarly, peak sun hours refer to the hours of they day where the sunlight is strong enough to power a solar panel. This is different from total sunlight hours, which is simply the amount of hours in a day when there is any sunlight.
Sunlight hits the earth directly at the equator. This is why the equator has a latitude of zero degrees. The latitude of Louisa is 38.0. Knowing the latitude of Louisa can help you plan for your solar panel setup, as the larger the latitude the more variance you will see throughout the year for total daily sunlight hours.
You will notice that the average peak sun hours for Louisa change based on the type of panel being used. The reason for this is quite simple. A fixed panel does exactly what it sounds like, remains fixed in one position at all times. A 1-axis and 2-axis panels have axis that allow them to rotate. The 1-axis rotates with the sun's daily east to west movement while a 2-axis also adjusts for seasonal changes.
Peak sun hours are greatly affected by weather patterns. Cloud coverage is a huge factor in peak sun hours per day because heavy cloud coverage will diminish the power of the solar insolation. You can use historical climate data to estimate average cloud and weather coverage, but it will obviously vary slightly from year to year.
For Louisa the number of average daily peak sunlight hours for a fixed solar panel is 4.5 hours. If you are using a more efficient 1 or 2-axis panel then the number will increase to 5.8 hours for a 1-axis panel and 6.9 hours for a 2-axis panel.