Home » Solar Turbine » Washington » Central Valley

It goes without saying that throughout the year the amount of sunlight in any given day is going to vary. The time of year and weather will have a strong influence on daily sunshine. Looking at the average amount of peak sunshine hours in a day during an entire year stretch is a valuable exercise when trying to determine the amount and type of solar panels you need to install to power your business or your home. 4 peak sun hours means that in Central Valley on average there are 4 hours a day where the sun is strong enough for solar panels to harness its energy. This number is less than the amount of total sunlight hours in a day because there are times during the day (ex. sunrise and sunset) where the sun is not strong enough to benefit solar panels.

Knowing that the latitude of Central Valley is 47.7 can be helpful for understanding total sunlight hour variance. As you approach the equator latitude approaches zero. The closer the latitude is to zero, the more consistent the daily sunlight hours are throughout the year. Total sunlight hour consistency simply makes planning for your solar power needs easier, but it is certainly not a requirement.

Although most things are out of our control, like the sunrise, sunset or the weather, we can control the angle and the kind of mount we use for a solar panel. The angle of the solar panel, if using a fixed mount, should generally be around the angle that is equal to the latitude of the location to maximize output. In the northern hemisphere, panels angles should be lower in the winter months and higher in the summer months As a fixed mount is set, it is ideal to place it at an angle that will capture the most sunlight during the year. A 1-axis tracking solar mount will track the sun across the sky from sunrise to sunset, but the angle will remain the same throughout the day. A 2-axis solar mount will track the sun throughout the day from East to West, but the angle will also change automatically as the seasons change and the angle of the sun in the sky changes. Thus, a 2-axis will have a higher rating of peak sun hours compared to the 1-axis or fixed.

The sunrise and sunset is very predictable every day, but things like cloud coverage and weather are less predictable and vary daily and annually. If a location that is usually very sunny experiences a huge increase in storms and cloud coverage in a given year than the average peak sun hours for that day or year will probably decrease. Tall objects such as trees and buildings can block out the sun during high solar insolation times, so be sure to strategically place your solar panels to get better efficiency.

For a fixed mounted solar panel in Central Valley, meaning that the solar panel will not track the sun in the sky, once can expect about 4 average peak sun hours per day. A 1-axis mount would increase this number to 5 hours per day because the panel would be facing the sun throughout the day. A 2-axis system that tracks the sun in the sky every day of the year would get approximately 6.4 hours per day in Central Valley.