Home » Solar Turbine » Washington » Yarrow Point

Peak sun hours is one of the most important criteria to examine when considering installing a solar power system. Peak sun hours are different than total sunlight hours in a day because the strength of the radiation of the sun varies throughout the day. For example, during sunrise and sunset the solar insolation from the sun is less powerful than at noon. For a moment of sunshine to be considered a peak sun hour the intensity needs to be at least 1 kilowatt per square meter. This means that a square meter of your solar panel should be receiving 1 kilowatt of energy from the sun. This number is used because it is an amount of light that allows a solar panel to produce output efficiently and not under perform due to lack of sunlight power.

The latitude at the equator of the earth is zero degrees. This is where sunlight strikes the earth most directly. Due to the earth's curved shape, sunlight hits at a various angles depending on location. As latitude increases, the further you are located from the equator and more variance you see in sunlight hours. The latitude of Yarrow Point is 47.6.

They type of solar panel you use has an affect on the average peak sunlight hours. Some panels allow for movement, so they can track the sun as it rises in the east and sets in the west, or as the seasons change and the sun's path changes. A fixed panel remains fixed and does not have the ability to rotate, whereas a 1-axis and 2-axis panel can adjust with the sun.

Although weather predicting technology has greatly evolved over time, it is still a rather unpredictable factor that will affect the amount of peak sun hours your solar power system will receive. Cloudy days for example will usually have lower peak sun hours that a clear sunny day. And areas that usually have more average sunny days per year will probably have higher peak sun hours that areas that are often overcast or stormy.

For Yarrow Point the number of average daily peak sunlight hours for a fixed solar panel is 4.5 hours. If you are using a more efficient 1 or 2-axis panel then the number will increase to 6 hours for a 1-axis panel and 6.2 hours for a 2-axis panel.