Home » Solar Turbine » Wisconsin » Cameron

The average peak sun hours of Cameron is a crucial measurable component needed to efficiently implement a solar power system in a home or business. Put simply, peak sun hours are the hours of sunlight a day that are strong enough to be efficiently absorbed by solar panels and eventually turned into usable electricity. Not every minute of sunlight during a day is strong enough to be useful to a solar power system. Think about just minutes after the sunrises, which officially counts towards total hours of sunlight, but is usually too weak to be counted in peak sun hours because the strength of the solar insolation is not strong enough near the horizon to be absorbed and turned into electricity at an efficient rate. Times during the day like this, where the sun is out but not strong enough, are not counted as peak sun hours. In other words, the amount of peak sun hours in a location will theoretically always be less than total sunlight hours for a given day.

Your latitude is an indicator of when the sunrises and sunsets and certain times of the year. If you live near the equator with a latitude of near zero, the sun will rise and set close to the same time all year resulting in consistent total sunlight hours per day. If you live near the poles, the time of sunrise and sunset will vary dramatically with each season, resulting in long days for part of the year and very short days at other times. So, locations closer to the equator will have more consistent amounts of peak sun hours throughout the year than locations closer to the poles.

Since a fixed solar panel is set in one position it is ideal to place it at an angle that will expose the panel to the most sunlight throughout the year. This angle is generally the same angle of your latitude which is 45.4 for Cameron. You do not need to strategically place a 1-axis or 2-axis panel as much as you do a fixed panel. A 1-axis panel follows the movement of the sun during the day. Additionally, a 2-axis panel also adjusts for the suns various positions in the sky throughout the year.

Weather is one of the major culprits that will cause inconsistent total peak sun hours for any given day. The sunrise and sunset will always be predictable every day, but the weather is hard to predict and cloud coverage can greatly diminish the efficiency of a solar power system on any given day. On the bright side, a location that is known to have cloudy weather a majority of the year could have unexpectedly more sunny days, so it can go both ways.

In Cameron the average yearly peak sun hours for a fixed tilt non-tracking solar panel mount is 4.8. This is for a fixed panel mounted at an angle that is equal to the latitude of the location for the entire year. The amount of peak sun hours increases to 5.4 hours if you are using a 1-axis panel, and to 5.5 hours if you upgrade to a 2-axis solar panel.