Home » Solar Turbine » Wisconsin » Dexterville

Peak sun hours is one of the most important criteria to examine when considering installing a solar power system. Peak sun hours are different than total sunlight hours in a day because the strength of the radiation of the sun varies throughout the day. For example, during sunrise and sunset the solar insolation from the sun is less powerful than at noon. For a moment of sunshine to be considered a peak sun hour the intensity needs to be at least 1 kilowatt per square meter. This means that a square meter of your solar panel should be receiving 1 kilowatt of energy from the sun. This number is used because it is an amount of light that allows a solar panel to produce output efficiently and not under perform due to lack of sunlight power.

The latitude at the equator of the earth is zero degrees. This is where sunlight strikes the earth most directly. Due to the earth's curved shape, sunlight hits at a various angles depending on location. As latitude increases, the further you are located from the equator and more variance you see in sunlight hours. The latitude of Dexterville is 44.4.

A tracking mount will increase the average peak sun hours for a solar power system. Think about a panel that is tracking the sun in the sky vs a panel that is fixed and not moving: you will see a higher efficiency ratio of productions. A 1-axis mount will track the sun from East to West from sunrise to sunset and move on a single axis of rotation. A 2-axis mount will track the Sun from East to West the same as a 1-axis mount would, but it will also track the angle of the sun in the sky as it slowly varies season to season. A 2-axis mount is more necessary in high latitude regions where the angle of the sun in the sky changes dramatically between each equinox.

Weather is a big determinate of average peak sun hours each day. There are many aspects of weather that can increase or lessen the peak sun hours in a day in a particular location. For example cloud coverage is a crucial variable. And more importantly, what type of cloud coverage; thin scattered clouds will have less diminishing power on the solar insolation than thick rainy storm clouds. Sometimes long periods of sunny days are rare in certain locations, this would increase average peak sun hours for that time-frame

The average daily peak sunlight hours in Dexterville, Wisconsin is 4.4 hours. Use this number when trying to calculate your solar needs in Dexterville. As you can see above, if you were to use a 1-Axis or 2-Axis panel then the daily average would increase to 5.7 hour and 5.9 hours, respectively.