Home » Solar Turbine » Wisconsin » Evansville

Peak sun hours are a vital measurement to understand when considering the installation of solar panels. Peak sun hours are not the same as total sunlight hours because not every hour of sunlight during the day has enough strength and solar insolation to qualify as a peak sun hour. The rule of thumb is that a peak sun hour is when the intensity of the sun that is hitting your solar panel is providing at least 1,000 watts per square meter. This is an arbitrary number, but it is a number where most solar panels will be producing an efficient output and not underperforming due to sunshine that is not strong enough or direct enough.

Your latitude is an indicator of when the sunrises and sunsets and certain times of the year. If you live near the equator with a latitude of near zero, the sun will rise and set close to the same time all year resulting in consistent total sunlight hours per day. If you live near the poles, the time of sunrise and sunset will vary dramatically with each season, resulting in long days for part of the year and very short days at other times. So, locations closer to the equator will have more consistent amounts of peak sun hours throughout the year than locations closer to the poles.

You will notice the difference in peak sunlight hours depending on the panel type. The more flexibility the solar panel has the efficient it can be throughout the day and the year. A fixed solar panel remains in the same position at all times. A 1-axis panel follows the sun throughout the day as it moves through the sky and eventually sets. A 2-axis panel not only tracks the daily movement, but also adjusts based on the sun's changing position in the sky throughout the year as the seasons change.

The sunrise and sunset is very predictable every day, but things like cloud coverage and weather are less predictable and vary daily and annually. If a location that is usually very sunny experiences a huge increase in storms and cloud coverage in a given year than the average peak sun hours for that day or year will probably decrease. Tall objects such as trees and buildings can block out the sun during high solar insolation times, so be sure to strategically place your solar panels to get better efficiency.

In Evansville the average yearly peak sun hours for a fixed tilt non-tracking solar panel mount is 4.7. This is for a fixed panel mounted at an angle that is equal to the latitude of the location for the entire year. The amount of peak sun hours increases to 5.1 hours if you are using a 1-axis panel, and to 5.9 hours if you upgrade to a 2-axis solar panel.