Home » Solar Turbine » Wyoming » Casper Mountain

Peak sun hours is one of the most important criteria to examine when considering installing a solar power system. Peak sun hours are different than total sunlight hours in a day because the strength of the radiation of the sun varies throughout the day. For example, during sunrise and sunset the solar insolation from the sun is less powerful than at noon. For a moment of sunshine to be considered a peak sun hour the intensity needs to be at least 1 kilowatt per square meter. This means that a square meter of your solar panel should be receiving 1 kilowatt of energy from the sun. This number is used because it is an amount of light that allows a solar panel to produce output efficiently and not under perform due to lack of sunlight power.

The latitude at the equator of the earth is zero degrees. This is where sunlight strikes the earth most directly. Due to the earth's curved shape, sunlight hits at a various angles depending on location. As latitude increases, the further you are located from the equator and more variance you see in sunlight hours. The latitude of Casper Mountain is 42.7.

You will notice the difference in peak sunlight hours depending on the panel type. The more flexibility the solar panel has the efficient it can be throughout the day and the year. A fixed solar panel remains in the same position at all times. A 1-axis panel follows the sun throughout the day as it moves through the sky and eventually sets. A 2-axis panel not only tracks the daily movement, but also adjusts based on the sun's changing position in the sky throughout the year as the seasons change.

There are more variables than latitude that can change average peak sun hours. Weather patterns and geography will influence solar insolation that reaches your system. Thick grey storm clouds for example will block out a lot of the sun to the point where there may be no peak sun hours in the middle of the day when the sun is usually very powerful. Trees and mountains can deflect the sunlight, so be sure your solar panel is selectively placed.

For a fixed mounted solar panel in Casper Mountain, meaning that the solar panel will not track the sun in the sky, once can expect about 6.3 average peak sun hours per day. A 1-axis mount would increase this number to 6.9 hours per day because the panel would be facing the sun throughout the day. A 2-axis system that tracks the sun in the sky every day of the year would get approximately 7.2 hours per day in Casper Mountain.