Home » Solar Turbine » Delaware » Bear

Peak sun hours is arguably the most important number to consider before installing your solar panels. Unlike total sun hours, peak sun hours are calculated by looking at the amount of sunlight hours in a 24 hour period that is strong enough to be absorb by a solar panel. One way to imagine peak sun hours is to think about a solar powered calculator you owned in school. If you covered the solar panel with your finger, or tried to use the calculator in the dark, the calculator would not work. As you slowly exposed the calculator to light the calculator would eventually turn on and be usable. The same is true with peak sun hours; these are the hours that your solar panels receive enough sunlight to work. Looking at the average peak sunlight hours of 4.6 per day can help you determine the amount of solar panels you need to install to power your home or business in Bear, Delaware.

If you open the newspaper in the morning or watch the weather channel on the news you can get an accurate prediction of sunrise and sunset each day for Bear. However, still knowing that the latitude of Bear is 39.6 can be a helpful number for your solar panel setup and planning. The closer your latitude is to zero the closer you are to the equator. At the equator you find the most consistent total sunlight hours throughout any given day of the year. As your latitude increases you can see larger discrepancies of daily sunlight hours during the year. For example, having very long summer days and very short and dark winter days

You will notice the difference in peak sunlight hours depending on the panel type. The more flexibility the solar panel has the efficient it can be throughout the day and the year. A fixed solar panel remains in the same position at all times. A 1-axis panel follows the sun throughout the day as it moves through the sky and eventually sets. A 2-axis panel not only tracks the daily movement, but also adjusts based on the sun's changing position in the sky throughout the year as the seasons change.

Another reason to consider average peak sun hours is because weather can dramatically affect the day-to-day output of solar panels. It goes without saying that a dark stormy day will produce less output than a clear sunny day. Looking at a yearly average helps account for these daily variables.

In Bear you can look at the average peak sun hours of a fixed solar panel mount, which will be 4.6 hours. This number iis an estimate based on data of previous years. With a tracking mount in Bear you could theoretically increase the amount of peak sun hours per with a 1-axis mount, and get 5.8 hours, or a 2-axis mount and potentially increase your average to 6 hours.